Expansion of HiSAT-COT Fast Transient Response Control Lineup 3.0A Synchronous Step-Down DC/DC Converters XC9274/XC9275 series

Aug 22, 2017

Torex Semiconductor Ltd. (Tokyo Japan: President, Koji Shibamiya, 6616: 2nd section at Tokyo Stock Exchange) has launched a new series of 3.0A synchronous rectification DC/DC stepdown converters (XC9274/XC9275) with our unique HiSAT-COT high-speed transient response control.


Recently, FPGAs and ASICs are provided with lower core voltage to reduce power consumption. In conjunction with lower core voltage, demand for DC/DC converters with higher precision output voltage increases year by year.
Load current for FPGAs and ASICs varies instantaneously, resulting in significant transient voltage fluctuation. Conventional DC/DC converters need large capacity output capacitors to control transient voltage fluctuation, and therefore require a lot of mounting space.


The XC9274/XC9275 Series are 3.0A synchronous rectification DC/DC stepdown converters capable of outputting low output voltage with high precision, and are equipped with “2nd generation HiSAT-COT” that supports faster transient response. The XC9274/XC9275 Series ICs are the ideal for POL power supplies for devices used with loads that fluctuate significantly.


With “2nd generation HiSAT-COT,” the XC9273/XC9274 Series provides FB voltage accurate to ±1% within the entire operating temperature range for higher output voltage precision. The new series features world class fast transient response characteristics (Fig. 1); enables more compact large capacity output capacitors that used to be required up to now -- about 25% less mounting space is required.


PWM control (XC9274) or PWM/PFM automatic switch control (XC9275) is available to support low ripple and efficient, high speed transient response in an entire load range from light to heavy.

Output current is 3.0A, input voltage range is 2.7 to 5.5V, output voltage range is 0.8 to 3.6V, and FB voltage precision is ± 1.0%. Switching frequency can be selected from 1.2MHz, which is efficient for power conversion, or 3.0MHz, which enables compact component size.

The soft-start feature is 0.25ms (internally fixed), and you can select whether or not to use the soft off feature that quickly discharges output voltage when operation stops. Facilitates handling of start sequence for FPGA, ASIC, etc.

Equipped with built-in overcurrent protection, short-circuit protection and thermal shutdown. Hiccup mode and latch stop type are provided for which the output can return automatically when released from overcurrent (short circuit) protection.
Uses general purpose SOP-8FD (4.9 x 6.0 x h1.55mm) package.



Fig. 1 Comparison of conventional


XC9274/XC9275 Series, SOP-8FD(4.9 x 6.0 x h1.55mm)




XC9274/XC9275 Series Features

  • Employs “2nd generation HiSAT-COT” equipped with Torex’s unique high-speed transient response control.
    World class fast transient response characteristics
    Requires 25% less mounting space than before
  • 3.0A max. output current
  • High precision output voltage including ambient temperature and load regulation
  • Driver incorporated type
  • SOP-8FD general-purpose package

XC9274

New

Step-Down DC/DC Converters, As for operation mode HiSAT-COT control excellent in transient response, Maximum Output Current 3.0A

Step-Down DC/DC Converters, As for operation mode HiSAT-COT control excellent in transient response, Maximum Output Current 3.0A

XC9275

New

Step-Down DC/DC Converters, As for operation mode HiSAT-COT control excellent in transient response, Maximum Output Current 3.0A

Step-Down DC/DC Converters, As for operation mode HiSAT-COT control excellent in transient response, Maximum Output Current 3.0A

Contact

Close