XC6802 Series

800mA 1 Cell Li-ion and Li-Po Battery Linear Charger IC with Constant-Current/Constant-Voltage

The XC6802 series is a constant-current/constant-voltage linear charger IC for single cell Lithium-ion and Lithium polymer batteries.

The battery charge termination voltage is internally set to 4.2V ±0.7% and the trickle charge voltage and accuracy is 2.9V ±3.0%. In trickle charge mode, a safe Lithium-ion and Lithium polymer charge to a battery is possible because approximately 1/10 out of setting charge current is supplied to the battery. With an external RSEN resistor, the charge current can be set freely up to 800mA (MAX.), therefore, the series is ideal for various battery charge applications.

The series’ charge status output pin, /CHG pin, is capable of checking the IC’s charging state while connecting with an external LED.

Typical Application Circuit


Operating Voltage Range 4.25V~6.0V
Charge Current Externally set up to 800mA(MAX.)
Charge Termination Voltage 4.2V±0.7%
Trickle Charge Voltage 2.9V±3%
Quiescent Current (Stand-by) 15μA(TYP.)
Functions Constant-current/constant-voltage Operation
Thermal Shutdown
Automatic Recharge
Charge Status Output Pin
Soft-start Function (Inrush Limit Current)



Technical Document

Quality Reports