1.0A Inductor Built-in Step-Down “micro DC/DC” Converters
The XCL220 series is a synchronous step-down micro DC/DC converter which integrates an inductor and a control IC in one tiny package (2.0mm×2.5mm, h=1.0mm). An internal coil simplifies the circuit and enables minimization of noise and other operational trouble due to the circuit wiring. A wide operating voltage range of 2.5V to 5.5V enables support for applications that require an internally fixed output voltage (0.8V to 3.6V). The XCL220 series uses synchronous rectification at an operating frequency of 3.0MHz. The XCL220 series uses HiSAT-COT(*) synchronous rectification.
The series have a high speed soft-start as fast as 0.3ms in typical for quick turn-on. With the built-in UVLO (Under Voltage Lock Out) function, the internal P-channel driver transistor is forced OFF when input voltage becomes 2.0V or lower. When CE=Low, the integrated CL discharge function which enables the electric charge at the output capacitor CL to be discharged via the internal discharge switch located between the LX and VSS pins. The power consumption will be less than 1.0μA.
(*) HiSAT-COT is an original Torex term for High Speed Transient Response
|Jul 1, 2015||
|Smallest size in the world! Step-down "micro DC/DC" converters with1.0A output current and integrated coil|
Typical Application Circuit
|Input Voltage Range||2.5V～5.5V|
|Control Methods||HiSAT-COT Control
100% Duty cycle
|Protection Circuits||Thermal Shut Down
Current Limit Circuit (Drop)
Short Circuit Protection
|Capacitor||Low ESR Ceramic|
|Operating Ambient Temperature||-40℃～+105℃|
|Environmentally Friendly||EU RoHS compliant, Pb free|
|Package||CL-2025-02||Number of Pins||6|
|Pcs/Reel||3,000||Package Size(mm)||2.0 x 2.5 x 1.04|
How does the GO function of DC/DC converters work? Does it work just like a regulator?
Torex regard the PWM/PFM automatic switch control function as Green Operation (GO) in the case of DC/DC. The GO function is defined as the switching operation between the PFM mode for a small output current and the PWM mode for a large output current. The PFM control method controls the output current by increasing and decreasing the fall time according to the output current while keeping a pulse width. The PWM control method controls the output current by adjusting the pulse width of the rise time, which keeps the rise/fall time interval constant and increases the efficiency at a heavy load. By switching between the PFM control for a small output current and the PWM control for a large output current, the quiescent current can be controlled for both of heavy and light loads.
What is the soft-start function?
The function to soften the rise to prevent the inrush current.
How does the CL discharge function work?
The function rapidly releases the charge remained in the CL capacitor to make the VOUT pin voltage zero. The VOUT pin voltage does not reach zero immediately after being turned off by the CE function due to the charge remained in the connected CL capacitor. While the charge in the CL capacitor is gradually reaching zero, the LSI continues operating and does not work with the CE pin signal, which may cause a malfunction. This is why the discharge is required when turning off the CE pin. A larger capacitance of the capacitor needs longer time to be discharged.
What does CL mean?
Load capacitor. Other companies often refer to it as COUT.
Similar to XCL220 Series