XC6415 Series

200mA Dual High Speed LDO Regulators with ON/OFF Switch

XC6415 series are highly accurate, Dual, low noise, CMOS LDO voltage regulators. Performance features of the series include low output noise, high ripple rejection rate, and low dropout. Extremely dense power supply circuit can be organized with a 2 channeled high speed voltage regulator in low ON resistance which is built-in to an ultra small USP-6C package. The output voltage for each regulator is set independently by laser trimming and selectable in 0.05V increments within a range of 0.8 to 5.0V. The EN function allows the output of each regulator to be turned off independently. In this state, with the XC6415 series, the IC turns on the internal switch located between the VOUT and the VSS pins. This short enables the electric charge at the output capacitor (CL) to be discharged via the internal auto-discharge resistance, and as a result the VOUT pin quickly returns to the VSS level. The series’ output stabilization capacitor (CL) is also compatible with low ESR ceramic capacitors. The high level of output stability is maintained even during frequent load fluctuations, due to the excellent transient response performance. Because regulator 1 and 2 are completely isolated, a cross talk between each channel, which causes a problem during load fluctuations, can be greatly reduced.

Typical Application Circuit


Output Current 200mA (300mA limit:TYP.)
Dropout Voltage 95mV@IOUT=100mA,VOUT(T)=3.0V
Operating Voltage Range 1.50V~6.0V
Output Voltage Range 0.8V~5.0V(0.05V increments)
High Accuracy ±1%(VOUT>2.0V),±2%(VOUT≧1.5V),
Low Quiescent Current 28μA/ch(TYP.)
Stand-by Current Less than 0.1μA
High Ripple Rejection: 65dB@1kHz
Operating Ambient Temperature -40℃~85℃
Output Capacitor 1.0μF Ceramic Capacitor Compatible



Quality Reports


QuestionWhat is the standby current?

The current that flows through the IC in the standby mode. The standby mode means the state where the IC has been turned off by the CE function.