XC6190 Series

Push Button Reboot Controller

The XC6190 series are timer reset ICs that supply a reboot signal to the system when “L” voltage is input into the SW1, SW2 pins for a set time (reboot delay time) using two switches (physical buttons).

On type A, the reboot delay time (TDL) can be set as desired by changing the external resistance RT within the range 1s to 20s.

On type B, TDL is fixed internally. When the TS pin is set to “H” level, the delay time is 12.5s. When the TS pin is set to “L” level, the delay time is 7.5s.

After the reboot signal (TRSTB) is output for 0.4s (TYP), the IC automatically returns to the steady state.

Quiescent current in standby mode is a very small 0.01uA (TYP.), and this contributes to a longer battery drive time. The small USPN-6 and USPN-6B01 packages enable reduction of mounting space.

The UVLO function is equipped as a protective function to prevent malfunctioning of the IC.

Your news

Jan 13, 2015
Product News
Push Button Reboot Controller XC6190 Series

Typical Application Circuit


Operating Voltage Range 1.75V~6.0V
Quiescent Current 0.01uA(Stand-by,TYP.)
Output Configuration N-channel open drain or CMOS output
RSTB Pin SINK Current 30mA(VRSTB=0.3V)
Reboot Delay Time (Type A)1s~20s(Adjustable by the external resistor)
(Type B)7.5s±5%(TS=GND),12.5s±5%(TS=VIN)
Reboot Time 0.4s±5%
Operating Ambient Temperature -40℃~+85℃



Technical Document

Quality Reports