Recommended

XC6192 series

Power saving Push Button Load switch

The XC6192 series are power saving push button load switch ICs that shut down (shut OFF) the power line after shipping testing of battery-equipped devices. This enables a significant saving of power consumption during prolonged storage. The power line can be forcefully shut down (shut OFF) by inputting one “H” level pulse into the SHDN pin.


The A type is equipped with an alternating ON/OFF control (*1) that turns the power line ON/OFF each time “L” signal is input into the SW pin for a set period of time, and is ideal for ON/OFF power switch applications and Ideal for forced shutdown in emergency. The B type fixes the power line in the power ON state when an “L” signal is input into the SW pin for a set period of time, and once the power line is in the power ON state, shutdown by the SW pin is not possible. This type is ideal for shipping mode applications where the power line is shut down (shut OFF) only for shipping using shutdown by the SHDN pin.

The XC6192 series enables input of an existing switch signal that is shared with other devices into the SW pin, and the small, surface-mount package contributes to space saving.

This IC is equipped with a SHDN pin that forcefully shuts down (shuts OFF) the power line, a PG pin (Nch open drain) that outputs a flag signal when it detects that the output voltage has risen, and as protective functions, an output short circuit protection function (fixes the power line at OFF when a voltage drop caused by a short circuit is detected), a rush current prevention function (startup through a resistance of 105 (Typ.) between VIN-VOUT until VOUT reaches a set voltage), and an output capacitor discharge function.
The supply current during shutdown is a very small 0.01μA (Typ.), which contributes to energy saving during prolonged storage.


(*1) The “Alternating ON/OFF control on this IC is a system that alternates between VOUT “H” voltage and shutdown each time “L” voltage is input the required time into the SW pin

Typical Application Circuit

Features

Input Voltage Range 2.5V~6.0V
Stand-by Current 0.01uA (TYP.)
Quiescent Current (Turn-On) 0.45μA (TYP.)
Turn-On Delay Time (TOND) 0.5s, 1.0s, 3.0s or 5s
Turn-Off Method (Type A )By inputting “H” voltage to the SHDN pin. By inputting “L” voltage during the TOFFD to the SW pin.
(Type B)By inputting “H” voltage to the SHDN pin.
Turn-Off Delay Time(TOFFD) 3s, 5s, 10s or 15s
Additional Function Power Good function (the PG pin)
Forced shutdown function (the SHDN pin)
Protection Function Inrush current protection
Output circuit short protection
Output capacitor discharge function
Operating Ambient Temperature -40℃ ~ +85℃

Packages

Package USP-8B06 Number of Pins 8
Pcs/Reel 5,000 Package Size(mm) 2.0 x 2.0 x 0.33

DATA SHEET

Close