XC6213 Series

High Speed LDO Regulators, Ultra Small Package

The XC6213 series are highly precise, low noise, positive voltage LDO regulators manufactured using CMOS processes. The series achieves high ripple rejection and low dropout and consists of a voltage reference, an error amplifier, a current limiter and a phase compensation circuit plus a driver transistor.

Output voltage is selectable in 0.05V increments within a range of 1.2V ~ 5.0V. The series is also compatible with low ESR ceramic capacitors, which give added output stability. The current limiter's foldback circuit also operates as a short protect for the output current limiter and the output pin.

The CE function enables the output to be turned off, resulting in greatly reduced quiescent current.

Typical Application Circuit

Features

MaximumOutput Current 150mA,(VOUT=3.0V,VIN=4.0V)
Dropout Voltage 400mV@IOUT=100mA
Operationg Input Voltage Range 2.0V~6.0V
Output Voltage Range 1.2V~5.0V(0.05V increments)
High Accuracy ±2%
Low Quiescent Current3 5μA(TYP.)
Stand-by Current Less than 0.1μA
High Ripple Rejection 60dB@10kHz
Operating Ambient Temperature -40℃~85℃
Low ESR Capacitor Low ESR Ceramic

Packages

DATA SHEET

Quality Reports

FAQ

QuestionWhat is the standby current?
Answer

The current that flows through the IC in the standby mode. The standby mode means the state where the IC has been turned off by the CE function.

Close