Low Quiescent Current, 200mA High Speed LDO Regulator 10.5V Input
Even the XC6505 series is a low power consumption such as 5.5μA, the IC is a high speed CMOS LDO regulator that features high accurate, low noise, high ripple rejection, and low dropout. The series consists of a voltage reference, an error amplifier, a driver transistor, a current limiter, a phase compensation circuit and a thermal shutdown circuit.
The CE function enables the circuit to be in stand-by mode by inputting low level signal. In the stand-by mode, the series enables the electric charge at the output capacitor CL to be discharged via the internal switch, and as a result the VOUT pin quickly returns to the VSS level.
The over current protection circuit and the thermal shutdown circuit are built-in. These two protection circuits will operate when the output current reaches current limit level or the junction temperature reaches temperature detection level.
|Sep 22, 2011||
|【New Product Release】XC6505 Series|
|Mar 30, 2011||
|10.5V Input, Low Power Consumption, High Speed 200mA LDO Regulator XC6505 Series|
Typical Application Circuit
|Input Voltage Range||1.7V～10.5V|
|Output Voltage Range||1.5V～8.0V(0.1V increments)|
|Output Voltage Temp. Characteristics||±30ppm/℃|
|Low Quiescent Current||5.5μA(TYP.)|
|CE Function||Active High,0.1μA (Stand-by)|
|High Ripple Rejection:||60dB@1kHz|
|Protection Circuits||Current Limit(300mA、TYP.),Short Circuit Protection(110mA、TYP.),Thermal Shut Down|
|Operating Ambient Temperature||-40℃～+105℃|
|Environmentally Friendly||EU RoHS compliant, Pb free|
|Package||SOT-25||Number of Pins||5|
|Pcs/Reel||3,000||Package Size(mm)||2.8 x 2.9 x 1.3|
|Package||SOT-89-5||Number of Pins||5|
|Pcs/Reel||1,000||Package Size(mm)||4.5 x 4.6 x 1.6|
|Package||USP-6C||Number of Pins||6|
|Pcs/Reel||3,000||Package Size(mm)||1.8 x 2.0 x 0.6|
- Reliability Test Data SOT-25 [0.1MB]
- Reliability Test Data SOT-89-5 [0.1MB]
- Reliability Test Data USP-6C [0.1MB]
- Material Declaration Sheet (Composition Table) SOT-25 [0.1MB]
- Material Declaration Sheet (Composition Table) SOT-89-5 [0.1MB]
- Material Declaration Sheet (Composition Table) USP-6C [0.1MB]
What is the standby current?
The current that flows through the IC in the standby mode. The standby mode means the state where the IC has been turned off by the CE function.