Recommended

XC6604 Series

1A, 0.5V Low Input Voltage, High Speed LDO Regulator (Adjustable Current Limit)

The XC6604 series is a low voltage input (0.5V) operation and provides high accuracy ±15mV / ±20mV and can supply large current efficiently due to its ultra low on-resistance even at low output voltages. The series is ideally suited to the applications which require high current in low input/output voltages and consists of a N-ch driver transistor, a voltage reference, an error amplifier, a current limiter, a fold-back circuit, a thermal shutdown (TSD) circuit, an under voltage lock out (UVLO) circuit, a soft-start circuit and a phase compensation circuit.

Output voltage is selectable in 0.1V increments within a range of 0.5V to 1.8V using laser trimming technology and ceramic capacitors can be used for the output stabilization capacitor (CL). When the output current reaches the current limit, the output voltage drops as well as the output current is decreased as a function of the foldback circuit. The current limit can be adjustable with connecting a resistor to the ILIM pin.

The CE function enables the output to be turned off and the series to be put in stand-by mode resulting in greatly reduced power consumption. At the time of entering the stand-by mode, the series enables the electric charge at the output capacitor (CL) to be discharged via the internal switch. As a result the VOUT pin quickly returns to the VSS level. The CE pull-down function keeps the IC to be in stand-by mode even if the CE pin is left open.

Your news

Jan 26, 2012
Product News
1A 0.5V Ultra-Low Dropout Voltage Regulator with Built-in Inrush Current Protection XC6603/XC6604 Series

Typical Application Circuit

Features

MaximumOutput Current 1A(1.3ALimit)
On Resistance 0.15Ω@VBIAS=3.6V,VOUT=1.2V
Bias Voltage Range 2.5V~6.0V
Input Voltage Range 0.5V~3.0V
Output Voltage Range 0.5V~1.8V(0.1V increments)
Output VoltageAccuracy ±0.015V@VOUT<1.2V
±0.020V@VOUT≧1.2V
Ripple Rejection 60dB@f=1kHz(VBIAS_PSRR)
75dB@f=1kHz(VIN_PSRR)
Quiescent Current 100μA(VBIAS),6.5μA(VIN)@VOUT=1.2V
Stand-by Current 0.01μA(VBIAS),0.01μA(VIN)
UVLO 1.8V(VBIAS),0.4V(VIN)
TSD 150℃@Detect,125℃@Release
Protection Circuits Foldback Current Limit,TSD,UVLO
Functions Adjustable Soft-start time with an external component
CE Pull-Down (Active High)
CL Auto Discharge
Capacitor Low ESR Ceramic(2.2μF)
Operating Ambient Temperature -40℃~+85℃
Environmentally Friendly EU RoHS compliant, Pb free

Packages

DATA SHEET

Technical Document

Quality Reports

FAQ

QuestionWhat is the standby current?
Answer

The current that flows through the IC in the standby mode. The standby mode means the state where the IC has been turned off by the CE function.

Similar to XC6604 Series

XC6602

Positive voltage regulator, Maximum Outpur Current 1A , Quiescent Current 100μA

Positive voltage regulator, Maximum Outpur Current 1A , Quiescent Current 100μA

XC6603

Recommended

Positive voltage regulator, Maximum Outpur Current 1A , Quiescent Current 100μA, 0.5V Low Input Voltage
Adjustable Soft-start time with an external component

Positive voltage regulator, Maximum Outpur Current 1A , Quiescent Current 100μA, 0.5V Low Input Voltage
Adjustable Soft-start time with an external component

Close