Recommended

XC6901 Series

200mA Negative Voltage High Speed Regulator with ON/OFF Control

The XC6901 Series is a negative voltage CMOS regulator which includes a reference voltage source, error amplifier, driver transistor, current limiter and phase compensator.

The CE function enables the circuit to be in stand-by mode by inputting low level signal. In the stand-by mode, the electric charge at the output capacitor (CL) will be discharged via the internal auto-discharge switch and as a result the -VOUT pin quickly returns to the VSS level.

The over current protection circuit will operate when the output current reaches limit current. The thermal shutdown circuit will operate when the junction temperature reaches limit temperature.

Your news

Oct 20, 2011
Product News
【New Product Leaflet】XC6901/XC6902 Series
May 24, 2011
Product News
200mA High Precision Negative Voltage Regulator with ON/OFF switch XC6901/XC6902 Series

Typical Application Circuit

Features

MaximumOutput Current 200mA
Input Voltage Range -2.4V~-16V+VCE
Output Voltage -0.9V~-12.0V
Output VoltageAccuracy ±1.5%(-2.0V~-12V)
Output Voltage Temp. Characteristics TYP.±50ppm/℃
CE High Level Voltage +1.2V,ActiveHigh
Dropout Voltage 400mV@IOUT=100mA
Low Quiescent Current 100μA
Stand-by Current Less than 0.1μA
Protection Circuits Current Limit 350mA TYP. Foldback、Overheat Protection TTSB=150℃
Capacitor Low ESR Capacitor
Function CL Discharge
Operating Ambient Temperature -40℃~+85℃
Environmentally Friendly EU RoHS compliant, Pb free

Packages

DATA SHEET

Technical Document

Quality Reports

FAQ

QuestionWhat is the standby current?
Answer

The current that flows through the IC in the standby mode. The standby mode means the state where the IC has been turned off by the CE function.

Similar to XC6901 Series

Close