500mA High Speed LDO Regulators, Voltage Detector Function
The XC6405 series are precise, low noise, high speed, high current, positive voltage low dropout regulators with built-in voltage detector. They are fabricated using Torex’s CMOS process. Performance features of the series includes high ripple rejection and low dropout voltage, and the series features a voltage reference, an error amplifier, a current limiter and a phase compensation circuit plus a driver transistor. Detect voltage is selectable in 100mV increments within the range of 0.9V to 5.5V and the LDO output voltage is selectable within a range of 0.9V to 5.1V, also in 0.1V increments. The series is also compatible with low ESR ceramic capacitors which give added output stability. This stability can be maintained even during load fluctuations due to the excellent transient response of the series.
The current limiter's foldback circuit also operates as a short circuit protection for the output current limiter and the output pin. The series provides options to the user to select from a variety of circuit features, such as detector monitoring, detector output logic, CE and EN pin input logic, internal pull-up / down resistance, and power ready.
The IC's internal regulator circuit can be placed in stand-by mode via the EN function (XC6405 A to C series). The whole IC can be put in to stand-by mode via the CE function with the XC6405D series (semi-custom). In the stand-by mode, power consumption is greatly reduced. The XC6405 A and B series features the toggle operation function. The regulator output can be OFF when the XC6405B series detects voltage (semi-custom). The XC6405E series can monitor another power source by using the VSEN pin (semi-custom).
The XC6405F series can delay the detector output the delay time can be controlled by the use of an external capacitor (semi-custom).
Typical Application Circuit
|MaximumOutput Current||More than 500mA(600mA limit),(2.5V≦VROUT≦4.9V)|
|Operating Voltage Range||2.0V~6.0V|
|Output Voltage Range||0.9V~5.1V(0.1V increments)|
|Detect Voltage Setting||0.9～5.5V(0.1V increments)|
|VR、VD Temperature Coefficient||±100ppm/℃(TYP.)|
|High Ripple Rejection:||65dB(10kHz)|
|Low ESR Capacitor||Low ESR Ceramic|
|Operating Ambient Temperature||-40~+85℃|
|Low Quiescent Current||90μA(TYP.)|
|Package||SOT-25||Number of Pins||5|
|Pcs/Reel||3,000||Package Size(mm)||2.8 x 2.9 x 1.3|
|Package||SOT-89-5||Number of Pins||5|
|Pcs/Reel||1,000||Package Size(mm)||4.5 x 4.6 x 1.6|
What is the standby current?
The current that flows through the IC in the standby mode. The standby mode means the state where the IC has been turned off by the CE function.