XC6408 Series

28V Operation Voltage Regulator with Voltage Detector

The XC6408 series is a positive voltage regulator IC manufactured using CMOS process with 28V operation voltage. The series consists of a voltage reference, an error amplifier, a current limiter, a thermal shutdown circuit and a phase compensation circuit plus a driver transistor. The output voltage and the detect voltage are user selectable in 0.1V increments. The over current protection circuit and the thermal shutdown circuit are built-in. These two protection circuits will operate when the output current reaches current limit level or the junction temperature reaches temperature limit level. The XC6408D series monitors its output voltage and provides reset signal if its output voltage falls below the pre-set voltage. This reset time (release delay time) can be set by an external capacitor. The XC6408E series monitors an external power supply and enables the output to be turned off and the IC becomes a stand-by mode.

Typical Application Circuit


MaximumOutput Current 150mA(VIN=VROUT+3.0V)
Dropout Voltage 175mV@IOUT=20mA(VROUT=12V)
Input Voltage Range 2.0V~28.0V
Output Voltage Range 2.0V~18.0V(0.1V increments)
Detect Voltage Range 2.0V~16.0V(0.1V increments)
High Accuracy Regulator±2%, Detector±2.5%
Low Power Consumption XC6408D 9.5μA(TYP.)(VROUT=12V,VDF=11V), XC6408E 8μA(TYP.)(VROUT=12V,VDF=11V)
Operating Ambient Temperature -40℃~85℃
Environmentally Friendly EU RoHS compliant, Pb free



Quality Reports