XC6103 Series

Voltage Detectors with Watchdog Timer & Manual Reset

The XC6103 series are groups of high-precision, low current consumption voltage detectors with manual reset input function and watchdog functions incorporating CMOS process technology. The series consist of a reference voltage source, delay circuit, comparator and output driver.

With the built-in delay circuit, the XC6103 series'ICs do not require any external components to output signals with release delay time. Moreover, with the manual reset function, reset can be asserted at any time.

The ICs produce two types of output;VDFL (low when detected) and VDFH (high when detected).
On the XC6103 series' ICs, the WD pin can be left open if the watchdog function is not used.
Whenever the watchdog pin is opened, the internal counter clears before the watchdog timeout occurs.

Moreover, since the manual reset pin is internally pulled up to the VIN pin voltage level, the ICs can be used with the manual reset pin left unconnected if the pin is unused.
The detect voltages are internally fixed 1.6V ~ 5.0V in increments of 100mV, using laser trimming technology.
Six watchdog timeout period settings are available in a range from 6.25ms to 1.6s.
Seven release delay time 1 are available in a range from 3.13ms to 1.6s.

Typical Application Circuit


Detect Voltage Range 1.6V~5.0V±2%(0.1V increments)
Hysteresis Width VDF×5%(TYP.)(XC6101~XC6105)
Operating Voltage Range 1.0V~6.0V
Detect Voltage Temperature Characteristics ±100ppm/℃(TYP.)
Output Configuration N-channel open drain or CMOS output
Watchdog Pin WD pin monitors CPU. If CPU provide a signal within the watchdog timeout period, RESET signal come out.
Manual Reset pin MRB pin signal input asserts forced reset
Release Delay Time 1.6s/400ms/200ms/100ms/50ms/25ms/3.13ms(TYP.) can be selectable
Watchdog Timeout Period 1.6s/400ms/200ms/100ms/50ms/6.25ms(TYP.) can be selectable



Quality Reports


QuestionWhat does the watchdog timer work?

This timer function is continuously monitoring to check whether the microcomputer is normally operating or not and give notice of any abnormal operation.

Similar to XC6103 Series


Voltage detector, Watchdog, Built-in delay circuit, Manual reset, Hysteresis range 0.1% , How when detected(CMOS output)

Voltage detector, Watchdog, Built-in delay circuit, Manual reset, Hysteresis range 0.1% , How when detected(CMOS output)